Hydraulic Power Pack/Unit for Valves

Brief introduction Hydraulic station, also known as hydraulic pump station, is an independent hydraulic system device, which according to the implementing agencies (relay, hydraulic execution cylinder) requirements for hydraulic oil, and control the direction of hydraulic oil flow, pressure and flow, Hydraulic station is composed of motor oil pump, manifold or valve combination, oil tank, electrical…

Flanged High Performance Hydraulic Counterweight Butterfly Valve

Nominal Diameter: DN150~DN3500 Nominal Pressure: PN6~PN40 Suitable Medium: Water, sea water, Sediment water, Oil and so on Medium temperature: <<80° C Opening valve time: 10~120 seconds( adjust) Quick closing time: 1.5~30 seconds(adjust) Slow closing time: 6~120 seconds(adjust) Fast close angle: 70° ± 10° Slow close angle: 20° ± 10° Open state minimum flow resistance coefficient:…

Manual Plunger Valve(Needle Valve)

DN 200mm~1200mm PN 0.6~2.5MPa Pressure test seat 1.1*PN shell 1.5*PN Medium temperature ≤80℃ medium water etc. Brief introductionMain Part MaterialFlow curve Needle valves (plunger valves) are widely used for flow control or control of flows with high pressure differences. Thanks to the special inner construction, the flow cross section is circular which allows for precise control.…

Hydraulic Operated Plunger Valve

DN 200mm~1600mm PN 0.6~2.5MPa Pressure test seat 1.1*PN shell 1.5*PN Medium temperature ≤80℃ medium water etc. Working pressure 0.8*PN Brief introductionMain Part Material The plunger valve is a straightway regulating and control valve which has an annular flow cross-section in any position. Inside the body, the open plunger (also referred to as piston) is moved…