Brief introduction Hydraulic station is composed of motor oil pump, manifold or valve combination, fuel tank, electrical control box combination. The function of each component is as follows: Motor oil pump – the motor and oil pump, which is the power source of the hydraulic station, the mechanical energy into hydraulic oil power. The manifold…
Brief introduction Hydraulic pump unit consisting of following main components: All associated valves such as distributing, proportional, control ,emergency shutdown, check valves including other types, piping, fitting etc. Oil filtration unit with changeover facility along with clogging indication Oil sump tank Motor driven main and standby oil pumps mounted on the sump tank Oil pressure…
Brief introductionWorking PrincipleProject References Hydraulic station is composed of motor oil pump, manifold or valve combination, fuel tank, electrical control box combination. The function of each component is as follows: Motor oil pump – the motor and oil pump, which is the power source of the hydraulic station, the mechanical energy into hydraulic oil power.…
Brief introduction Hydraulic station is composed of motor oil pump, manifold or valve combination, fuel tank, electrical control box combination. The function of each component is as follows: Motor oil pump – the motor and oil pump, which is the power source of the hydraulic station, the mechanical energy into hydraulic oil power. The manifold…
Brief introduction Hydraulic station, also known as hydraulic pump station, is an independent hydraulic system device, which according to the implementing agencies (relay, hydraulic execution cylinder) requirements for hydraulic oil, and control the direction of hydraulic oil flow, pressure and flow, Hydraulic station is composed of motor oil pump, manifold or valve combination, oil tank, electrical…
A hydraulic power unit is usually composed of hydraulic pump, electric motor, oil tank, manifold block, valves, electric box, filter, solenoid valve, pressure gauge, etc. The brands of the components can be designated by customers, i.e. well known brands which are readily available from local distributors in customers’ area (this will make the spare parts…
Main implementation criteria Product manufacturing: GB / T3766-2001, GB / T7935-2005, Q / BZZ 09-2009 Test standard: Q / BZZ 09-2009 The configuration is according to user’s special requirement. Brief introduction The motor pump unit and the pump control valve group are responsible for providing a pressure source to the system. The function of the…
Nominal pressure: PN10/ PN16 Nominal diameter:DN50~2000 Brief introductionMain Part MaterialProject References Dismantling joint used to facilitate assembly or disassembly of valves installed in pipelines. Mostly applied in water treatment, water distribution and waste water , dams, power plants etc. Product features and benefits Designed to provide adjustment in flanged pipe systems For easy installation and dismantling of…
Electric control box
Hydraulic power unit
